View PC3224TB-15_8990206.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
description the pc3224tb is a silicon monolithic ic desi gned as if amplifier for dbs tuners. this ic is manufactured using our 30 ghz f max uhs0 (u ltra h igh s peed process) silicon bipolar process. features ? wideband response : f u = 3.2 ghz typ. @ 3 db bandwidth low current : i cc = 9.0 ma typ. power gain : g p = 21.5 db typ. @ f = 1.0 ghz : g p = 21.5 db typ. @ f = 2.2 ghz supply voltage : v cc = 4.5 to 5.5 v port impedance : input/output 50 ? application if amplifiers in dbs converters etc. ordering information part number package marking supplying form pc3224tb-e3 6-pin super minimold c3k ? embossed tape 8 mm wide ? 1, 2, 3 pins face the perforation side of tape ? qty 3 kpcs/reel remark to order evaluation samples, contact your nearby sales office. part number for sample order: pc3224tb data sheet caution observe precautions when handling because these devices are sensitive to electrostatic discharge. the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all devices/types available in every country. please check with local nec compound semiconductor devices representative for availability and additional information. bipolar analog integrated circuit pc3224tb document no. pu10490ej01v0ds (1st edition) date published may 2004 cp(k) printed in japan ? nec compound semiconductor devices 2004 5 v, silicon mmic wideband amplifier
pin connections pin no. pin name 1 input 2 gnd 3 gnd 4 output 5 gnd 3 2 1 4 c3k (top view) 5 6 4 5 6 3 (bottom view) 2 1 6 v cc product line-up of 5 v-bias silico n mmic medium wideband amplifier (t a = +25 c, f = 1 ghz, v cc = v out = 5.0 v, z s = z l = 50 ) part no. f u (ghz) p o (sat) (dbm) g p (db) nf (db) i cc (ma) package marking pc2711tb 2.9 +1.0 13 5.0 12 6-pin super minimold c1g pc2712tb 2.6 +3.0 20 4.5 12 c1h pc3215tb note 2.9 +3.5 20.5 2.3 14 c3h pc3224tb 3.2 +4.0 21.5 4.3 9.0 c3k note pc3215tb is f = 1.5 ghz remark typical performance. please refer to electrical characteristics in detail. data sheet pu10490ej01v0ds 2 pc3224tb
pin explanations pin no. pin name applied voltage (v) pin voltage (v) note function and applications 1 input ? 0.91 signal input pin. a internal matching circuit, conf igured with resistors, enables 50 connection over a wide band. a multi-feedback circuits is designed to cancel the deviations of h fe and resistance. this pin must be coupled to signal source with capacitor for dc cut. 4 output ? 4.42 signal output pin. a internal matching circuit, conf igured with resistors, enables 50 connection over a wide band. this pin must be coupled to next stage with capacitor for dc cut. 6 v cc 4.5 to 5.5 ? power suplly pin. this pin should be externally equipped wi th bypass capacitor to minimize its impedance. 2 3 5 gnd 0 ? ground pin. this pin should be connected to system ground with minimum inductance. ground pattern on the board should be formed as wide as possible. all the ground pins must be connect ed together with wide ground pattern to decrease impedance difference. note pin voltage is measured at v cc = 5.0 v data sheet pu10490ej01v0ds 3 pc3224tb
absolute maximum ratings parameter symbol conditions ratings unit supply voltage v cc t a = +25 c 6.0 v total circuit current i cc t a = +25 c 25 ma power dissipation p d t a = +85 c note 270 mw operating ambient temperature t a ? 40 to +85 c storage temperature t stg ? 55 to +150 c input power p in t a = +25 c +10 dbm note mounted on double-sided copper-clad 50 50 1.6 mm epoxy glass pwb recommended operating range parameter symbol conditions min. typ. max. unit supply voltage v cc 4.5 5.0 5.5 v operating ambient temperature t a ? 40 +25 +85 c electrical characteristics (t a = +25 c, v cc = 5.0 v, z s = z l = 50 ) parameter symbol test conditions min. typ. max. unit circuit current i cc no input signal 7.0 9.0 12.0 ma power gain g p f = 1.0 ghz, p in = ? 30 dbm 19.0 21.5 24.0 db f = 2.2 ghz, p in = ? 30 dbm 18.5 21.5 24.5 saturated output power p o (sat) f = 1.0 ghz, p in = ? 5 dbm +1.5 +4.0 ? dbm f = 2.2 ghz, p in = ? 5 dbm ? 1.5 +1.5 ? p o (1 db) f = 1.0 ghz ? 6.5 ? 3.5 ? dbm gain 1 db compression output power f = 2.2 ghz ? 8.5 ? 5.5 ? noise figure nf f = 1.0 ghz ? 4.3 5.8 db f = 2.2 ghz ? 4.3 5.8 upper limit operating frequency f u 3 db down below flat gain at f = 0.1 ghz 2.8 3.2 ? ghz isolation isl f = 1.0 ghz, p in = ? 30 dbm 35.0 40.0 ? db f = 2.2 ghz, p in = ? 30 dbm 37.0 42.0 ? input return loss rl in f = 1.0 ghz, p in = ? 30 dbm 9.0 12.0 ? db f = 2.2 ghz, p in = ? 30 dbm 10.0 14.0 ? output return loss rl out f = 1.0 ghz, p in = ? 30 dbm 11.0 17.0 ? db f = 2.2 ghz, p in = ? 30 dbm 8.0 12.0 ? gain flatness g p f = 0.1 to 2.2 ghz ? 0.8 ? db data sheet pu10490ej01v0ds 4 pc3224tb
other characteristics, for re ference purposes only (t a = +25 c, v cc = 5.0 v, z s = z l = 50 ) parameter symbol test conditions reference value unit output intercept point oip 3 f = 1.0 ghz +7.0 dbm f = 2.2 ghz +5.5 data sheet pu10490ej01v0ds 5 pc3224tb
test circuit v cc 1 000 pf c 3 c 1 100 pf in 50 6 4 1 2, 3, 5 100 pf c 2 50 out 1 000 pf c 4 the application circuits and their parameters are for reference only and are not intended for use in actual design-ins. components of test circuit for measuring electrical characteristics type value c 1 , c 2 chip capacitor 100 pf c 3 chip capacitor 1 000 pf c 4 feed-through capacitor 1 000 pf capacitors for the v cc , input and output pins capacitors of 1000 pf are recommendable as the bypass capacitor for the v cc pin and the coupling capacitors for the input and output pins. the bypass capacitor connected to the v cc pin is used to minimize ground impedance of v cc pin. so, stable bias can be supplied against v cc fluctuation. the coupling capacitors, connec ted to the input and output pins, are used to cut the dc and minimize rf serial impedance. their capacitances are therefore selected as lower impedance against a 50 load. the capacitors thus perform as high pass filters, s uppressing low frequencies to dc. to obtain a flat gain from 100 mhz upwar ds, 1 000 pf capacitors are used in the test circuit. in the case of under 10 mhz operation, increase the value of coupling capacitor such as 10 000 pf. because the coupling capacitors are determined by equation, c = 1/(2 rfc). data sheet pu10490ej01v0ds 6 pc3224tb
illustration of the test circuit assembled on evaluation board in out v cc amp-2 c1 c2 c3 c4 notes 1. 30 30 0.4 mm double sided copper clad polyimide board. 2. back side: gnd pattern 3. solder plated on pattern 4. : through holes component list value c 1 , c 2 100 pf c 3 , c 4 1 000 pf data sheet pu10490ej01v0ds 7 pc3224tb
typical characteristics (t a = +25 c , unless otherwise specified) 16 14 12 10 8 6 4 2 0 0123456 0.1 1.1 2.1 5.1 0 ? 20 ? 40 ? 60 ? 80 ? 100 10 0 ? 10 ? 20 ? 30 25 23 21 19 17 15 12 11 10 9 8 7 6 ? 60 ? 40 ? 20 0 + 20 + 40 + 60 + 80 + 100 v cc = 5.0 v v cc = 4.5 to 5.5 v t a = ? 40 c t a = + 25 c t a = + 85 c v cc = 5.0 v t a = + 25 c v cc = 5.5 v 3.1 4.1 0.1 1.1 2.1 5.1 10 0 ? 10 ? 20 ? 30 t a = + 25 c v cc = 5.5 v 3.1 4.1 v cc = 4.5 v v cc = 5.0 v 0.1 1.1 2.1 5.1 3.1 4.1 t a = + 25 c 0.1 1.1 2.1 5.1 3.1 4.1 v cc = 4.5 v v cc = 5.0 to 5.5 v t a = + 25 c v cc = 4.5 v no input signal circuit current vs. supply voltage circuit current i cc (ma) supply voltage v cc (v) circuit current vs. operating ambient temperature circuit current i cc (ma) operating ambient temperature t a ( c) no input signal power gain vs. frequency frequency f (ghz) power gain g p (db) input return loss vs. frequency input return loss rl in (db) frequency f (ghz) isolation vs. frequency isolation isl (db) frequency f (ghz) output return loss vs. frequency frequency f (ghz) output return loss rl out (db) remark the graphs indicate nominal characteristics. data sheet pu10490ej01v0ds 8 pc3224tb
0.1 1.1 2.1 5.1 25 23 21 19 17 15 t a = + 85 c t a = + 25 c v cc = 5.0 v t a = ? 40 c 3.1 4.1 0.1 1.1 2.1 5.1 10 0 ? 10 ? 20 ? 30 v cc = 5.0 v 3.1 4.1 t a = + 25 to + 85 c t a = ? 40 c 0 ? 20 ? 40 ? 60 ? 80 ? 100 t a = ? 40 to + 85 c 0.1 1.1 2.1 5.1 3.1 4.1 v cc = 5.0 v 10 0 ? 10 ? 20 ? 30 v cc = 5.0 v 0.1 1.1 2.1 5.1 3.1 4.1 t a = + 85 c t a = ? 40 c t a = + 25 c power gain vs. frequency frequency f (ghz) power gain g p (db) input return loss vs. frequency input return loss rl in (db) frequency f (ghz) isolation vs. frequency isolation isl (db) frequency f (ghz) output return loss vs. frequency frequency f (ghz) output return loss rl out (db) remark the graphs indicate nominal characteristics. data sheet pu10490ej01v0ds 9 pc3224tb
10 5 0 ? 5 ? 10 ? 15 ? 20 ? 40 ? 35 ? 30 ? 25 ? 20 ? 15 ? 10 ? 5510 0 f = 1.0 ghz t a = + 25 c v cc = 4.5 v 10 5 0 ? 5 ? 10 ? 15 ? 20 ? 35 ? 30 ? 25 ? 20 ? 15 ? 10 ? 5510 0 f = 2.2 ghz v cc = 5.0 v v cc = 5.0 v v cc = 5.5 v 10 5 0 ? 5 ? 10 ? 15 ? 20 ? 40 ? 35 ? 30 ? 25 ? 20 ? 15 ? 10 ? 5510 0 f = 1.0 ghz v cc = 5.0 v t a = ? 40 c t a = ? 40 c 10 5 0 ? 5 ? 10 ? 15 ? 20 ? 40 ? 35 ? 30 ? 25 ? 20 ? 15 ? 10 ? 5510 0 f = 2.2 ghz t a = + 25 c v cc = 4.5 v v cc = 5.0 v v cc = 5.5 v 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 ? 80 v cc = 5.5 v im 3 5.0 v v cc = 5.0 v v cc = 5.5 v v cc = 4.5 v f 1 = 1 000 mhz f 2 = 1 001 mhz p out ? 50 ? 45 ? 40 ? 35 ? 30 ? 25 ? 20 ? 15 ? 50 ? 10 4.5 v 10 0 ? 10 ? 20 ? 30 ? 40 ? 50 ? 60 ? 70 ? 80 im 3 f 1 = 2 200 mhz f 2 = 2 201 mhz p out ? 50 ? 45 ? 40 ? 35 ? 30 ? 25 ? 20 ? 15 ? 50 ? 10 ? 40 t a = + 25 to + 85 c t a = + 25 to + 85 c v cc = 5.5 v 5.0 v 4.5 v 5.0 v 4.5 v 5.5 v 5.5 v 5.0 v 4.5 v output power vs. input power output power p out (dbm) input power p in (dbm) output power vs. input power output power p out (dbm) input power p in (dbm) output power vs. input power output power p out (dbm) input power p in (dbm) output power vs. input power output power p out (dbm) input power p in (dbm) output power (2 tones), im 3 vs. input power 3rd order intermodulation distortion im 3 (dbm) output power (2 tones) p out (dbm) input power p in (dbm) 3rd order intermodulation distortion im 3 (dbm) output power (2 tones) p out (dbm) input power p in (dbm) output power (2 tones), im 3 vs. input power remark the graphs indicate nominal characteristics. data sheet pu10490ej01v0ds 10 pc3224tb
s-parameters (t a = +25 c, v cc = 5.0 v) s 11 ? frequency 1.0 ghz 2.2 ghz s 22 ? frequency 2.2 ghz 1.0 ghz data sheet pu10490ej01v0ds 11 pc3224tb
package dimensions 6-pin super minimold (unit: mm) 0.90.1 0.7 0 to 0.1 0.15 +0.1 ?0.05 0.2 +0.1 ?0.05 2.00.2 1.3 0.65 0.65 1.250.1 2.10.1 0.1 min. data sheet pu10490ej01v0ds 12 pc3224tb
notes on correct use (1) observe precautions for handling because of electro-static sensitive devices. (2) form a ground pattern as widely as possible to mi nimize ground impedance (to pr event undesired oscillation). all the ground pins must be connect ed together with wide ground pattern to decrease impedance difference. (3) the bypass capacitor should be attached to v cc line. (4) the dc cut capacitor must be eac h attached to input and output pin. recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recomm ended below, contact your nearby sales office. soldering method soldering conditions condition symbol infrared reflow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below ir260 wave soldering peak temperature (molten solder temperature) : 260 c or below time at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 c or below maximum number of flow processes : 1 time maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below ws260 partial heating peak temperature (pin temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering met hods together (except for partial heating). data sheet pu10490ej01v0ds 13 pc3224tb
m8e 00. 4 - 0110 the information in this document is current as of may, 2004. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation, nec compound semiconductor devices, ltd. and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above). ? ? ? ? ? ? data sheet pu10490ej01v0ds 14 pc3224tb
nec compound semiconductor devices hong kong limited e-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) hong kong head office taipei branch office korea branch office tel: +852-3107-7303 tel: +886-2-8712-0478 tel: +82-2-558-2120 fax: +852-3107-7309 fax: +886-2-2545-3859 fax: +82-2-558-5209 nec electronics (europe) gmbh http://www.ee.nec.de/ tel: +49-211-6503-0 fax: +49-211-6503-1327 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 0401 nec compound semiconductor devices, ltd. http://www.ncsd.necel.com/ e-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) 5th sales group, sales division tel: +81-44-435-1588 fax: +81-44-435-1579 for further information, please contact pc3224tb

▲Up To Search▲

Price & Availability of PC3224TB-15

	To Download PC3224TB-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .